How do I do a channel search?

Answering for HU2011 & HU3012:

1. Connect the aerial- and the power cable.

2. Turn on the TV (on-off button)

3. Press the menu button so that the menu will appear.

4. Press right once so that you enter the channel menu.

5. Press right so that CH-scan (channel scan) highlights.

6. Press right once and it will search automatically.

Answering for HU2713 & HU3221:

1. Connect the aerial- and the power cable. Turn on the TV (on-of button).

2. Press the menu button so that the menu appears.

3. Press down so that you highlight TV SETUP Press right so that you highlight CH-SCAN (channel scan)

4. Press right and a country menu will appear.

5. Press right until you have highlighted the country you want.

6. Press down and it will do an automatic search.

How do I put my channels in order?

Answering for HU2011 & HU3012:

1. Turn on the TV and press the menu button

2. Press down so that the TV-Setup will be highlighted, then press right

3. Press down so that you highlight Pr-Edit (program edit)

4. Press right to continue

5. All of your channels will appear

6. To browse, press up or down highlight the channel you want to move and press R on the remote

7. The highlighted channel changes color

8. Browse up or down and stop where you want the channel and press R (on the remote) again to confirm the change.

Answering for HU2713 & HU3221:

1. Turn on the TV and press the menu button so that the menu appears.

2. Press down so that the TV-Setup will be highlighted, then press right.

3. Press down until you highlighted TV SETUP

4. Press right to continue

5. Press down until you highlighted Program, then press right

6. Use up or down to browse through the channels

7. When you have highlighted the channel you wanted to move press left, and it will change color again

8. Browse again and highlight where you want the channel and press left to move the selected channel.

Is it possible to turn off the LCD TV so it won’t stand in Stand-by mode?

Answer:

No, but it only takes 3Watts in Stand-by mode. If you aren’t going to use it for a longer period pull out the power cable.

If my remote control isn’t working properly, what can I do?

Answer:

Change the batteries and check the batterysockets. Clean the transmitting window.

How do I rescale the picture on my monitor?

Answer:

Press the Aspect button (HU2713 / HU3221). Press the scaling button on the remote to change the view format.

Which wall brackets fit to the Hugoson LCD monitors?

Answer:

Vesa100 is the standard wall bracket except for HU3221 for which you will need a Vesa200

PAL, what is it?

Answer:

It’s a video standard that is being used in several countries. All Scandinavian countries use it. PAL stands for “Phase Alternation by Line”.

Are the Hugoson LCD monitors ready to receive HDTV signal?

Answer:

HU2713 and HU3221 are ready according to the European standards of HDTV (DVI, HDMI, HDCP)

What current is used for the Hugoson LCD monitors?

Answer:

It is 220-240 V. HU2011 can also be connected to 12V if you want to use it in your trailer, caravan or boat.